1
Five pieces for multiple projects and replacements.
Supports full-step, half-step, and micro-stepping modes.
Compatible with Arduino and various 3D printers.
Adjustable current control for optimal performance.
Over-temperature and under-voltage protection features included.
Easy step and direction control interface.
Includes heat sinks for efficient thermal management.
Average Rating out of 5:
Price Range: $10.19
2
Pack of 6 ultra-quiet stepper motor drivers.
Supports UART, Step, and DIR modes.
Continuous current up to 2.0A, peaks at 2.8A.
Voltage range: 4.75V to 28V maximum output.
StealthChop2 technology for ultra-silent operation.
Compatible with popular 3D printer electronics.
Lower resistance for higher current and efficiency.
Average Rating out of 5:
Price Range: $29.99
Material: PCB
3
5pcs DRV8825 Stepper Motor Drivers included.
Compatible with 3D printers and RepRap setups.
Supports up to 45V maximum supply voltage.
Improved heat dissipation with 4-layer PCB.
Direct interface for 3.3V and 5V systems.
Simple step and direction control interface.
Ideal for RAMPS1.4 and StepStick applications.
Average Rating out of 5:
Price Range: $14.49
Size: Small
4
Ultra-quiet operation for smooth performance.
2.8A peak current for high torque.
Compatible with multiple control boards.
Supports STEP/DIR and UART communication modes.
Stall detection feature for reliable operation.
Large thermal pad for effective heat dissipation.
Minimizes step loss for consistent movement.
Average Rating out of 5:
Price Range: $13.99
Material: PCB
5
Compatible with Arduino, 3D printers, and CNC machines.
Includes three A4988 drivers and heat sinks.
Supports stepper motors with up to 2A current.
Automatic current decay mode selection for efficiency.
Five step resolutions for precise control options.
Over-temperature shutdown and under-voltage lockout protection.
Easy integration with popular 3D printer models.
Average Rating out of 5:
Price Range: $7.99
Color: 3pcs A4988
6
Ultra-quiet stepper motor driver technology.
Compatible with popular 3D printer electronics.
Continuous drive current of 1.4A, peak 2A.
Voltage range from 4.75V to 36V.
256 subdivisions for smooth and precise control.
Includes heat sink and screwdriver for easy installation.
Replaces TMC2100, A4988, DRV8825 drivers effectively.
Average Rating out of 5:
Price Range: $18.99
Color: TMC2208
Material: TMC2208 V1.2 stepper driver module
7
Includes 10 stepper motor driver modules.
Comes with 10 heatsinks for efficient cooling.
Easy to operate with built-in converter.
Compatible with A4988 for micro-stepping control.
Five-step resolution for precise motor control.
Output capacity up to 35V and 2A.
Features multiple protection functions for safety.
Wide compatibility with 3D printers and CNC machines.
Average Rating out of 5:
Price Range: $12.99
8
Simple step and direction control interface.
Compatible with 3D printers like Mendel and Huxley.
Five step resolutions for versatile operation.
Adjustable current control via potentiometer.
Intelligent chopping control for accurate performance.
Over-temperature and under-voltage protection features.
Output drive capacity up to 35 V.
Average Rating out of 5:
Price Range: $9.99
9
Compatible with 3D printers and CNC machines.
Includes 4 A4988 stepper motor driver modules.
Features PWM spindle and direction pin control.
Supports up to four axes: X, Y, Z, A.
Easy installation with Arduino compatible design.
Includes heatsinks for effective thermal management.
Ideal for custom firmware and advanced projects.
Average Rating out of 5:
Price Range: $9.99
Color: Kits
Material: Metal
10
Compatible with A4988 and DRV8825 stepper drivers.
Supports GRBL 0.8 open source firmware.
Provides PWM control for spindle and direction.
Offers 4-axis support: X, Y, Z, A.
Includes protection against thermal and short circuits.
Easy connection via 4-pin connectors or soldering.
Five step modes for adjustable motor performance.
Average Rating out of 5:
Price Range: $9.99
Color: Red
11
Compatible with A4988 and DRV8825 stepper drivers.
Input voltage range: 12-36V DC.
Manages three stepper motors with six IO ports.
Simple wiring for easy motor connection.
GRBL 0.9 compatible for Arduino UNO.
Open source firmware for G-code commands.
Ideal for CNC and 3D printing projects.
Average Rating out of 5:
Price Range: $7.99
12
Simple step and direction control interface
Short-to-ground and load protection features
Five step resolutions for versatile performance
Adjustable current control via potentiometer
Intelligent chopping control for optimal performance
Over-temperature thermal shutdown for safety
Compatible with RAMPS and RepRap systems
Average Rating out of 5:
Price Range: $4.99
13
High capacity: 45V and ±2.5A output.
Supports full step and microstepping modes.
4-layer PCB design for improved heat dissipation.
Low internal resistance for minimal heat generation.
Compatible with various 3D printers and CNC machines.
Ideal for robotics and office automation projects.
SMT manufacturing ensures stable performance and high yield.
Average Rating out of 5:
Price Range: $9.99
14
Over-temperature thermal shutdown for safety.
Over-current shutdown protects your equipment.
Under-voltage lockout prevents system failure.
More stable performance than A4988 driver.
Wide voltage range: 8.2V to 45V.
Supports six step resolutions for flexibility.
Short circuit and overheat protection included.
Average Rating out of 5:
Price Range: $8.99
Color: Purple
15
Replaces TMC2209 and TMC2208 seamlessly.
Ultra silent operation for quiet environments.
Improved heat dissipation with HTSSOP packaging.
Supports larger current for enhanced performance.
Features sensorless-homing functionality.
Easy UART mode setup with jumper caps.
Includes 5 drivers and 5 heatsinks.
Average Rating out of 5:
Price Range: $24.99
Material: Aluminum
16
High-performance stepper motor driver module.
Compatible with Arduino and popular platforms.
Supports six microstepping resolutions for precision.
Overcurrent and overheat protection features included.
Low power consumption for efficient operation.
Ideal for 3D printers and CNC machines.
Reliable stepper motor control for various applications.
Average Rating out of 5:
Price Range: $16.99
17
Precision control for stepper motors in projects.
Supports up to 1.5A per phase operation.
Includes heatsink for efficient heat dissipation.
Simple current adjustment for optimal motor performance.
Compatible with various 3D printers and CNC machines.
Durable design for demanding project environments.
Ideal choice for hobbyists and professionals alike.
Average Rating out of 5:
Price Range: $5.99
Color: Red
18
6PCS LED driver modules included for convenience.
3W/2W output for versatile applications.
DC constant current for stable LED operation.
PWM dimming for adjustable brightness levels.
Input voltage range: DC 5‑35V.
Built-in safety features: overload and short circuit protection.
Efficient chips for energy saving and durability.
Average Rating out of 5:
Price Range: $14.98
19
Professional CNC controller kit for DIY enthusiasts.
Includes three Nema 23 stepper motors.
1.2Nm holding torque for reliable performance.
DM556 step motor driver for smooth operation.
350W power supply with multiple protections.
Supports Mach3 control for advanced functionality.
Stable output and efficient energy conversion.
Price Range: $99.00
Material: Aluminum
20
Complete microstepping motor driver with translator.
Supports five step resolutions for precision control.
Output drive up to 35V and ±2A.
Intelligent chopping control for optimal performance.
Over-temperature and under-voltage protection features.
Ideal for 3D printers and CNC machines.
Easy installation and reliable operation guaranteed.
Average Rating out of 5:
Price Range: $13.99
Color: A4988
Material: Aluminum
21
Compatible with Arduino Nano for easy integration.
Supports A4988 stepper motor drivers for precision.
Ideal for 3D printing and CNC engraving applications.
Includes digital IO interface for module connections.
Works with GRBL firmware for enhanced functionality.
Compact design for easy installation and setup.
Supports multiple axes for complex projects.
Average Rating out of 5:
Price Range: $9.49
Color: Red
Material: Plastic
22
Compatible with Ramps 1.4 and A4988 modules.
Supports six step resolutions for precise control.
Thermal shutdown prevents overheating and damage.
Overcurrent and undervoltage protection features included.
4 Layer PCB enhances heat dissipation efficiency.
Includes heat sinks for optimal performance.
Works with both 3.3V and 5V systems.
Average Rating out of 5:
Price Range: $9.99
23
5-pack of high-performance stepper motor drivers.
Continuous current up to 2.0A, peak 2.8A.
Supports UART, STEP/DIR modes for versatility.
Ultra-silent operation with stealthChop2 technology.
Prevents step loss with StallGuard4 technology.
Excellent heat dissipation for extended use.
Compatible with popular 3D printer motherboards.
Average Rating out of 5:
Price Range: $26.99
24
Enhances 3D printer stepper motor performance.
Reduces vibration for smoother operation.
Minimizes noise during printing processes.
Includes flyback diodes for protection.
Safeguards against induction voltage issues.
Compatible with DVR8825 and A4988/2 drivers.
Improves movement in delta-style 3D printers.
Average Rating out of 5:
Price Range: $11.99
25
Compatible with CNC routers and 3D printers.
Includes 4 DRV8825 stepper motor drivers.
Easy installation with Arduino IDE support.
4 slots for stepper motor modules available.
Adjustable current limit for optimal performance.
Overcurrent and thermal protection features included.
Supports multiple microstep resolutions for precision control.
Average Rating out of 5:
Price Range: $18.30
26
Compatible with MKS Gen and Ramps1.4 boards.
Supports MKS TB6600 stepper motor driver.
Simple installation for quick setup.
Enhances performance of large motor drives.
Ideal for 3D printer applications.
Five motor drivers for efficient operation.
Compact design for space-saving installation.
Price Range: $16.89
