CanaKit Raspberry Pi 4 Starter Kit (4GB)

  • Includes Raspberry Pi 4 Model B with 4GB RAM.
  • Pre-loaded 32GB EVO+ Micro SD Card included.
  • High-gloss case with integrated fan mount.
  • Low noise bearing system fan for cooling.
  • 3.5A USB-C power supply with noise filter.
  • Set of heat sinks for efficient thermal management.
  • 6-foot display cable supports up to 4K60p.

Best Alternatives and Similar Products for CanaKit Raspberry Pi 4 Starter Kit (4GB)

The best Single Board Computers includes Raspberry Pi 4 Model B (4GB), ELEGOO ESP-32 Development Board (3PCS), AITRIP ESP32 Development Board (3PCS) and many others as mentioned below.

1

Raspberry Pi 4 Model B (4GB)

Best Product
  • Quad-core ARM Cortex-A72 processor at 1.5GHz
  • 4GB LPDDR4 RAM for efficient multitasking
  • Supports dual-band WiFi and Bluetooth 5.0
  • Two USB 3.0 and two USB 2.0 ports
  • Dual micro HDMI ports for 4K video output
  • Micro SD slot for OS and data storage
  • Requires 5.1V power via USB Type C
  • Price Range: $62.99
  • 2

    ELEGOO ESP-32 Development Board (3PCS)

    Best Product
  • Dual-core 32-bit processor up to 240 MHz.
  • Integrated Wi-Fi and Bluetooth for seamless connectivity.
  • Low-power design for energy-efficient IoT applications.
  • Rich peripheral interfaces: GPIO, UART, SPI, and I2C.
  • Supports Over-the-Air firmware updates for easy maintenance.
  • Compatible with Arduino IDE for smooth development.
  • Includes three boards for versatile project options.
  • Price Range: $16.99
  • 3

    AITRIP ESP32 Development Board (3PCS)

    Best Product
  • Dual-mode WiFi and Bluetooth capabilities.
  • Supports Arduino IDE for easy programming.
  • Three operation modes: AP, STA, AP+STA.
  • Integrated antenna for improved signal strength.
  • Ultra-low power consumption for efficiency.
  • Compatible with LWIP and FreeRTOS protocols.
  • Ideal for various IoT applications and projects.
  • Price Range: $15.99
  • Color: 3PCS
  • 4

    ELEGOO UNO R3 Complete Starter Kit (200+ Components)

  • Includes over 200 essential components for projects.
  • Comes with a comprehensive PDF tutorial and lessons.
  • Fully compatible with Arduino UNO R3 and R4.
  • All modules are pre-soldered for easy setup.
  • Packaged in a convenient compartmentalized case.
  • Bonus box for organizing small electronic parts.
  • Includes UNO R3 controller board and USB cable.
  • Price Range: $45.98
  • Color: V1.0
  • 5

    ELEGOO Fun Electronics Kit [235 Items]

  • Includes 235 essential electronic components for projects.
  • Compatible with Arduino and other microcontrollers.
  • High-quality precision potentiometer for better performance.
  • Comes with power supply module and breadboard.
  • Includes jumper wires and F-M Dupont wires.
  • Perfect for beginners and experienced hobbyists alike.
  • Ideal for DIY electronics and learning projects.
  • Price Range: $8.99
  • 6

    DEYUE 6 PCS Solderless Breadboard Set

  • 6 PCS solderless breadboard set for projects.
  • 400 tie-points for extensive prototyping needs.
  • Perfect for Raspberry Pi and Arduino applications.
  • Easy pin insertion with consistent hole alignment.
  • Snap together seamlessly for versatile configurations.
  • Guaranteed satisfaction with easy refund policy.
  • Durable design to prevent circuit failures.
  • Price Range: $6.68
  • 7

    ELEGOO Nano Boards with USB Cable (ATmega328P)

  • Pre-soldered for easy setup and use.
  • Compact design fits easily on breadboards.
  • Features ATmega328P and CH340 chips.
  • Supports Arduino IDE for programming.
  • Multiple power supply options available.
  • Compatible with various microcontroller projects.
  • Beginner-friendly with available tutorials.
  • Price Range: $19.99
  • 8

    ELEGOO MEGA R3 ATmega 2560 Board

  • 100% compatible with Arduino IDE.
  • Features Atmega 2560-16AU and 16U2 chip.
  • Enhanced RESET circuit for reliability.
  • Includes USB cable for easy connection.
  • Supports various AC-to-DC adapters or batteries.
  • Improved pinout with additional SDA and SCL pins.
  • RoHS compliant for safe usage.
  • Price Range: $21.84
  • Color: Black
  • 9

    iUniker Raspberry Pi 4 Case with Fan

  • Unique removable top cover for easy access.
  • Includes a 40mm quiet cooling fan.
  • Effective heatsink for improved thermal management.
  • Compatible with Raspberry Pi 4 Model B.
  • Sleek design enhances the appearance of your Pi.
  • Simple installation and maintenance process.
  • Designed for optimal cooling performance and longevity.
  • Price Range: $9.99
  • Color: Black With Large Fan
  • Material: Acrylonitrile Butadiene Styrene (ABS)